ScaNET : is CA Server for DOTNET a possibility ?

[Mogamat Amien Crombie <acrombie@tlabs.ac.za>]

Hi

I have recently been looking at moving some of our DOTNET systems on to 
EPICS.
The ALS-LBL website's NET scanetx86.msi work superbly as my EPICS client 
using VS 2008 and Measurement Studio.
But I need to get a Channel Access Server for DOTNET as well. Or even 
any info on how I can get some CAS for c# going would be appreciated.
We wrote a DOTNET interface to all our Rabbit MCU's (tcpip socket 
server) to gather ADC current measurements from our harps. Each harp 
sends 2 X 48 channel adc over the socket to our DOTNET server.
To rewrite this as an IOC would be overkill as our harps have no 'other' 
atributes we need, just the 48 channels array values.
I have done this successfully with the COM version (ActiveX CA from SNS) 
but development has ceased since 2000.

Thanx-
Amien (Cape Town - South  Africa)