1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | nidaqmxbase synapps module |
From: | Terry Cornall <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Fri, 28 Nov 2008 17:08:43 +1100 |
Hi All. I’m using NIDAQmxBase written by Ulrik
Pederson in 2007 in an Epics application driving a National Instruments card. It all works, but if I open two ports to the card,
one for DAC and the other for ADC, and I write fast enough to the DAC port, I
get buffer underflows on the ADC port. Has anyone found a fix for this? (It might be to do
with the National Instruments drivers, of course, which are nidaqmxbase v 3.2.0
and NIKAL 1.7) |