EPICS Re: SUB Record SNAM/INAM routine definition

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025
<== Date ==>		<== Thread ==>

Subject:	Re: SUB Record SNAM/INAM routine definition
From:	Tim Mooney <[email protected]>
To:	Steve Kinder <[email protected]>
Cc:	epics <[email protected]>
Date:	Tue, 23 Dec 2008 14:21:01 -0600

Steve, makeBaseApp has an example of this. Do this:

<base>/bin/<arch>/makeBaseApp.pl -t example example
<base>/bin/<arch>/makeBaseApp.pl -i -t example example

Steve Kinder wrote:

I would like to use a SUB record with a Linux softIOC. Could someone please help me understand where/how to define the actual routines which I identify in the SNAM/INAM fields of this record.

Thanks

Steve


--
Tim Mooney ([email protected]) (630)252-5417
Beamline Controls & Data Acquisition Group
Advanced Photon Source, Argonne National Lab.

References:: SUB Record SNAM/INAM routine definition Steve Kinder

Navigate by Date:: Prev: SUB Record SNAM/INAM routine definition Steve Kinder; Next: initial(init_value) rule within a field sometimes works ivan; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025
Navigate by Thread:: Prev: SUB Record SNAM/INAM routine definition Steve Kinder; Next: initial(init_value) rule within a field sometimes works ivan; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025