1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | EPICS asyn error message |
From: | Richard Pastrick <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Mon, 12 Jan 2009 17:48:32 -0800 |
I am running into some problems while trying to setup a Delta Tau UMAC to communicate over IP with an EPICS server. I am simply trying to get the asyn interface to work at this point. I receive the following error messages when I run the following commands: drvAsynIPPortConfigure("pmac0","172.24.68.50:1025",0,1,0) drvAsynMotorConfigure("pmac0", "pmacAsynMotor", 0, 6) asynCommon:registerDriver pmac0 already registered dryAsynMotorConfigure Error: Can’t register port I am using base 3.14.8.2, asyn 4.9, and motor r6-3. The implementation I am trying to use is the synApps tpmac available from
http://www.gmca.aps.anl.gov/TPMAC2/ I have looked at all of the example .src files that I could find in epics downloads but to no avail and I am very confused right now. Any help that any of you can give would be greatly appreciated. Thank you. Richard Pastrick Associate Software Engineer Xradia Inc 5052 Commercial Cir Concord CA 94520 925-288-1228 Ext 1151 925-348-0384 (cell) The information in this email, including any attachments, is confidential and intended only for the recipient(s) listed. Any use of this email for any other purpose is prohibited. If you have received this email in error, please notify me immediately by reply email, delete this email, and do not disclose its contents to anyone. |