Experimental Physics and Industrial Control System
Dear Tech-talk,
I finally have the time to ask this question. When trying to set the
default mask via the config file I haven't had any luck when applying
it to a group, i.e.
GROUP NULL HV ---T-
GROUP HV Boards
However, it works as expected for an individual channel
CHANNEL West_1 TOF:HV:Positive:West:1:14:1:vmon ---T-
Reading through the manual, in version 1.2.23 in Ch. 6 it says under
the "Group or Channel" that the mask is only applicable to CHANNEL.
However when discussing the sample config file it says:
In this example the default mask "-----" is used for every channel.
That is, no masks are specified on the group and channel lines.
Which seems to indicate one can set a mask via the group.
Is there a syntax difference between setting the mask for GROUP and
CHANNEL?
It would make it considerably easier for me if I could set it in the
group else I would need to do it for all 571 channels (could be worse
I know).
I am using ALH 1.2.24 on OS X 10.5.6 PPC with EPICS 3.14.9
Thanks,
Bertrand
- Navigate by Date:
- Prev:
Re: epics GUIs (update) Elder Matias
- Next:
Re: Motor problems(RBV can't update itself) Ron Sluiter
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Motor problems(RBV can't update itself) Xu, Huijuan
- Next:
24 bit ADC Pearson, MR (Matthew)
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024