EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025 
<== Date ==> <== Thread ==>
Subject: connections with pasynOctetSyncIO->connect
From: John Hammonds <[email protected]>
To: Tech Tech Talk <[email protected]>
Date: Mon, 30 Mar 2009 23:21:21 -0500
What checks should be done to verify a connection with pasynOctetSyncIO->connect? I have a driver that calls this. The return value is asynSuccess but the pasynUser->errorMessage is "port usaxsEns or addr -1 not connected" and we see no communication. 

Thanks,
John

--
John Hammonds
Beamline Controls and Data Acquisition Group
APS Engineering Support Division

Argonne National Laboratory
[email protected] <mailto:[email protected]>
(630)252-5317
Replies:
RE: connections with pasynOctetSyncIO->connect Mark Rivers
Navigate by Date:
Prev: Re: Smoothing and alarm filtering on the analog input record - a proposal Kasemir, Kay
Next: Re: Smoothing and alarm filtering on the analog input record - a proposal Dirk Zimoch
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025 
Navigate by Thread:
Prev: Re: Smoothing and alarm filtering on the analog input record - a proposal Dirk Zimoch
Next: RE: connections with pasynOctetSyncIO->connect Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025