Experimental Physics and Industrial Control System
I have set up a PV gateway, and the gateway is built against EPICS Base R3.14.10. When I brought up the gateway, I saw the following errors scrolling up in the log:
...
../../../../src/cas/io/bsdSocket/casDGIntfIO.cc: CA beacon (send to "172.21.40.20:5081") error was "Connection refused"
Jun 11 11:44:57 !!! Errlog message received (message is above)
../../../../src/cas/io/bsdSocket/casDGIntfIO.cc: CA beacon (send to "172.21.40.20:5081") error was "Connection refused"
...
The gateway was up, but not functional at all, I checked the gateway diagnostic panel, nothing was connected, including the gateway's internal PVs.
Any idea?
Thanks,
Jingchen
- Navigate by Date:
- Prev:
EDM / CA error: CA value callback('...'): No data, CA status The requested data transfer is greater than available memory or EPICS_CA_MAX_ARRAY_BYTES Carl Schumann
- Next:
problem about environment variables under vxWorks-6.6 Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
EDM / CA error: CA value callback('...'): No data, CA status The requested data transfer is greater than available memory or EPICS_CA_MAX_ARRAY_BYTES Carl Schumann
- Next:
FW: PV gateway Jeff Hill
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024