1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | re: "A32 RegisterAddress error" about Hytec8401 |
From: | "liuping" <[email protected]> |
To: | <[email protected]> |
Date: | Thu, 25 Jun 2009 16:19:17 +0800 |
Hi all, Thank you for your reply! The problem was done. One guy gave me a bootrom.bin
file, and I flash it into mvme5500 Boot Best regards, LIU Ping From:
[email protected] [mailto:[email protected]] Hi, As a fresh man, I need your help. The hardware is
Hytec8002 and hytec8401. Hytec8401ip driver came from Diamond website. I made
my own application project with EPICS V ## Load record instances dbLoadRecords("db/8401.db") value = 0 =
0x0 ####################### #
slot int options IPCAC6 = ipacEXTAddCarrier(&EXTHy8002, "6 2
10") Id: drvHy8002.c,v 1.10 2001/11/20 12:21:42 wscott Exp 8002 initialise 6 2 10 PROM manufacturer ID: 0x8003 (HyTec Electronics Ltd., PROM model #: 0x8002, board rev. 0x03
PROM Xilinx rev.: 0x03, 0x00, 0x07
PROM Serial #: 0x00 0x00 0x00 0x00 0x05
0xce drvHy8002filename="../.: A32 RegisterAddress
error (status=./..34144267/src/libCom/)osi/devLib.c" line vmeslot
number=282 6, ipslot unable to m0ap address VME A32 at
address base=0X11800000800000 size =
0X100000 0xIP memo1ef31290ry register (error!
tShell): drvHy8002ipacAddCarrie: Cannot register A32
device at r: 1800000Hytec VICB8002. Error is driver retur209000bned an
error.
new symbol "IPCAC6" added to symbol
table. IPCAC6 = 0x1ee87ff0: value = -1 =
0xffffffff #-------- 8401 (Analogue
Input)------------------------------------------------
#
card, slot, ipsl, intl, inte, aity,
clks, clkr, inhi, samp, spac, trig
Hy8401ipConfigure ( 60, IPCAC6,
A, 0, 0, 0,
0, 15, 0, 1,
1, 0) $Id: drvHy8401ip.c,v 1.8 2005/10/27 09:07:01 mga83 Exp
$ Hy8401ipConfigure: card 60, VME slot -1, IP slot
0,
vector 0, itr state 0, ai type 0,
clock src 0, clock rate 15, inhibit 0,
samples 1, spacing 1, trigger 0
value = 0 = 0x0 shellPromptSet "1054-Test> " value = 2178076 = 0x iocInit()
Starting iocInit ############################################################################
### EPICS IOC CORE built on Jul 16
2008
### EPICS R ############################################################################
***drvIpac version extended for Hot
Swap ***$Id: drvIpac.c,v 1.3 2004/05/17 10:57:14 pho Exp
$ SPAWNING HOTSWAP SCAN TASK 0x1ef31290 (tShell): drvHy8401ip: Cannot register
Hy8401ip A16 device.iocInit: All initialization complete value = 0 =
0x0 Done executing startup script
/home/blctrl/hytec_ADC/iocBoot/iocHy8401ADC/st.cmd 1054-Test> //////////////////////////////////////////////////// I check out the error “A32 RegisterAddress error” come
from the line 667 of drvHy8002.c file How to correct? Thanks a lot! ==================================== LIU Beamline
Control Group Shanghai
Synchrotron Radiation Facility Shanghai
Institute of Applied Physics Shanghai
201204 Tel:+86-21-33933237 =================================== |