1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: How to change baudrate to 921600 in asyn? |
From: | Dirk Zimoch <[email protected]> |
To: | Christof Motzko <[email protected]> |
Cc: | [email protected] |
Date: | Tue, 21 Jul 2009 18:44:27 +0200 |
Hi Christof,921600 baud may be more than the serial interface of your IOC supports. Have a look at the hardware specifications for your IOC.
Dirk Christof Motzko wrote:
Hi,I am trying to communicate with the I-7565 USB/CAN Converter with StreamDevice, which can be used as local serial device. A baud rate of 921600 is necessary for the Converter, but I can't configure asyn to this baud rate. Can anybody tell me how I can change the baud rate to 921600?Thanks Christof --------------- Christof Motzko Institut f. Experimentalphysik I Ruhr-Universitaet-Bochum Universitaetsstr. 150 D-44780 Bochum
-- Dr. Dirk Zimoch Paul Scherrer Institut, WBGB/006 5232 Villigen PSI, Switzerland Phone +41 56 310 5182