RE: Keithley 6514 Electrometer support for RS232

["Krempasky Juraj" <juraj.krempasky@psi.ch>]

Hello Linda,

 

we use a stream device talking to a LanGPIB, but the same protocol can be used to RS232. The stream protocol and template files identify the Keithley first and than based on the model type (6514, 6485, 6517, 5617A) the corresponding I/O is used. The system runs on a Linux soft-ioc. If you are interested in I can send you the project.

 

regards

 

Juraj

 

 

---

From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of Pratt, Linda (DLSLtd,RAL,DIA)
Sent: Donnerstag, 13. August 2009 17:34
To: tech-talk@aps.anl.gov
Subject: Keithley 6514 Electrometer support for RS232

Does anyone have EPICS support for the Keithley 6514 Electrometer for use over RS232?

 

Thanks

 

Linda

 

Linda Pratt
Software Systems Engineer
Phone: +44 (0)1235 778058
Diamond Light Source

This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom