Re: Keithley 6514 Electrometer support for RS232

[Joe Sullivan <sullivan@aps.anl.gov>]

6514 support is available in the 'ip' synApps module
    http://www.aps.anl.gov/bcda/synApps/ip/ip.html

ipApp/src/Keithley65xxEM.st (sequence program)
ipApp/Db/Keithley65xxEM.db
ipApp/op/adl/Keithlye65xxEM.adl

---- example configuration

# Keithley 6517A Electrometer
dbLoadRecords("$(IP)/ipApp/Db/Keithley65xxEM.db","P=xxx:,Dmm=EM1,PORT=serial1")

# Keithley 6517A electrometer (10 chan)
seq &Keithley65xxEM,("P=xxx:, Dmm=EM1, channels=10, model=6517A")
---------------------------

This support is based on the Keithley 2K DMM(also in the ip module) which
uses asyn serial ports.

Joe


Pratt, Linda (DLSLtd,RAL,DIA) wrote:
> Does anyone have EPICS support for the Keithley 6514 Electrometer for 
> use over RS232?
>  
> Thanks
>  
> Linda
>  
>
> Linda Pratt
> Software Systems Engineer
> Phone: +44 (0)1235 778058
> Diamond Light Source
--
Joseph Sullivan
sullivan@aps.anl.gov <> 630-252-8657
Advanced Photon Source
APS Engineering Services Division
Beamline Controls & Data Acquisition Group