Experimental Physics and Industrial Control System
Subject: |
compiling streamDevice with CALC set fails |
From: |
"Dr. Peter Zumbruch" <[email protected]> |
To: |
EPICS tech-talk <[email protected]> |
Date: |
Wed, 21 Oct 2009 18:02:15 +0200 |
Hi everybody,
when compiling streamDevice 2.4 from psi web page with CALC set in the
RELEASE file
I get the following output
> base: 3.14.10, Debian 4.0
> ...
> make[2]: Entering directory
> `<EPICS_TOP>/modules/soft/StreamDevice/StreamDevice-2-4/srcSynApps/O.linux-x86'
> Installing created dbd file ../../../dbd/streamSynApps.dbd
> /usr/bin/gcc-3.4 -c -D_POSIX_C_SOURCE=199506L -D_POSIX_THREADS
> -D_XOPEN_SOURCE=500
> -D_X86_ -DUNIX -D_BSD_SOURCE -Dlinux -D_REENTRANT -ansi -O3
> -Wall -m32 -g -fPIC
> -I. -I../O.Common -I. -I.. -I../../../include/os/Linux
> -I../../../include
> -I<EPICS_TOP>/modules/soft/seq/sncseq-2.0.12/include
> -I<EPICS_TOP>/base-3.14.10/include/os/Linux
> -I<EPICS_TOP>/base-3.14.10/include
> -I<EPICS_TOP>/modules/soft/asyn/asyn-4.10/include
> -I<EPICS_TOP>/modules/synApps/synApps_5_4_1/support/calc/2-7/include
>
> ../devscalcoutStream.c
> /usr/bin/ar -rc libstreamSynApps.a devscalcoutStream.o
> /usr/bin/ranlib libstreamSynApps.a
> make[2]: *** No rule to make target
> `../../../lib/linux-x86/libiocsh.a', needed by `libstreamSynApps.so'.
> Stop.
> make[2]: Leaving directory
> `<EPICS_TOP>/modules/soft/StreamDevice/StreamDevice-2-4/srcSynApps/O.linux-x86'
> make[1]: *** [install.linux-x86] Error 2
> make[1]: Leaving directory
> `<EPICS_TOP>/modules/soft/StreamDevice/StreamDevice-2-4/srcSynApps'
> make: *** [srcSynApps.install] Error 2
without CALC set, everything compiles the right way.
and here the corresponding RELEASE
> #RELEASE Location of external products
> ...
>
> #If using the sequencer, point SNCSEQ at its top directory:
> SNCSEQ=<EPICS_TOP>/modules/soft/seq/sncseq-2.0.12
>
> # EPICS_BASE usually appears last so other apps can override stuff:
> EPICS_BASE=<EPICS_TOP>/base
>
> ASYN=<EPICS_TOP>/modules/soft/asyn/asyn-4.10
> CALC=<EPICS_TOP>/modules/synApps/synApps_5_4_1/support/calc/2-7
> PCRE_INCLUDE=/usr/include/pcre
> PCRE_LIB=/usr/lib
Any help would be appreciated,
Peter
--
Dr. rer. nat. Peter W. Zumbruch
EE - department / Controls group / GSI
E-Mail: P.Zumbruch_at_gsi.de
Tel: +49-(6159)-71-1435 / Fax: +49-(6159)-71-2986
GSI Helmholtzzentrum für Schwerionenforschung GmbH
Planckstraße 1 / D-64291 Darmstadt / www.gsi.de
Gesellschaft mit beschränkter Haftung
Sitz der Gesellschaft: Darmstadt
Handelsregister: Amtsgericht Darmstadt, HRB 1528
Geschäftsführung: Professor Dr. Horst Stöcker, Christiane Neumann
Vorsitzende des Aufsichtsrates: Dr. Beatrix Vierkorn-Rudolph,
Stellvertreter: Ministerialdirigent Dr. Rolf Bernhardt
- Replies:
- Re: compiling streamDevice with CALC set fails Tim Mooney
- Navigate by Date:
- Prev:
RE: CLS OMS 58 Failure Report Elder Matias
- Next:
Re: compiling streamDevice with CALC set fails Tim Mooney
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: CLS OMS 58 Failure Report Elder Matias
- Next:
Re: compiling streamDevice with CALC set fails Tim Mooney
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024