EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: Re: Prosilica GE1350
From: John Hammonds <[email protected]>
To: Steve Kinder <[email protected]>
Cc: epics <[email protected]>
Date: Fri, 04 Dec 2009 09:47:40 -0600
It looks like it should. The interface that Mark shows on his documentation (http://cars9.uchicago.edu/software/epics/prosilicaDoc.html) shows this working for the GC1380H which is in the same family of cameras. Since he is programming to the vendor's software interface, I would imagine that this would work. 

John

Steve Kinder wrote:
I would like to interface to a Prosilica GE1350 CCD camera and I believe this should be ok from the areaDetector package. Please could anyone confirm successful use of this combination or my belief. Thanks Steve 

--
John Hammonds
Beamline Controls and Data Acquisition Group
APS Engineering Support Division

Argonne National Laboratory
[email protected] <mailto:[email protected]>
(630)252-5317
References:
Prosilica GE1350 Steve Kinder
Navigate by Date:
Prev: RE: Prosilica GE1350 Mark Rivers
Next: Cross Building Extensions David Dudley
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: Prosilica GE1350 Mark Rivers
Next: Cross Building Extensions David Dudley
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024