RE: Support for PI C863

["Gabadinho Jose" <Jose.Gabadinho@psi.ch>]

Title: Message

Hello!

 

At the SLS we have a C-863 controller working properly with the C-862 EPICS motor

driver. We have it connected through a serial-port to a Linux PC running a soft-ioc.

 

We don't have any major problems with it (apart from some rare disconnections which

we can't figure out the origin)...

 

Cheers,

Jose

 

---

From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of peter.leicester@diamond.ac.uk
Sent: 02 December 2009 12:34
To: tech-talk@aps.anl.gov
Subject: Support for PI C863

 

I have a PI C-863 Mercury motor controller http://www.physikinstrumente.com/en/products/prdetail.php?sortnr=900605 that I would like to control from epics.

 

I notice the motor record support includes a bunch of drvPIC862 files. Does anyone know if this will drive the C-863? The 862 was replaced by the 863, is there much/any difference? 

 

Pete

 

Mr P J Leicester

Senior Software Controls Engineer

Diamond Light Source Ltd.
Diamond House
Harwell Science and Innovation Campus
Didcot
Oxfordshire
OX11 0DE

 

Tel: 01235 778478

 

 

-- 

This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom