| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 <2010> 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 <2010> 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | RE: compact PCI versus VME |
| From: | "Dalesio, Leo" <[email protected]> |
| To: | "Jeff Hill" <[email protected]>, "Hoff, Lawrence" <[email protected]> |
| Cc: | Eric Bjorklund <[email protected]>, [email protected] |
| Date: | Thu, 28 Jan 2010 11:10:07 -0500 |
Ø We're using
XC5VSX95T-1FF1136I (Virtex 5SX family with 1136 BGA package). The large DSP block (640 DSP48 blocks, mainly for high speed BPM filter) is main reason for the decision. It is pin to pin compatible with Virtex5 FX70 chip (which was used on the 507 demo board, it has 128 DSP48 blocks
Ø And have implemented a standard interface between the analog and digital portions. This allows us to customize the IO portion. We are embedded an event receiver into the digital portion of the board.