Experimental Physics and Industrial Control System
It looks like somewhere along the line this got changed to 'thread' -- see src/libCom/iocsh/libComRegister.c around line 204.
There's also 'epicsThreadShowAll' which isn't in the app dev guide iocsh command descriptions at all.
I think that changing the documentation is probably the right thing to do ('show' should become 'thread' and 'epicsThreadShowAll' should be added).
Alternatively, should 'show' become 'epicsThreadShow' in the documentation and 'thread' become epicsThreadShow in the code?
On Mar 28, 2010, at 7:18 PM, Mark Rivers wrote:
> Folks,
>
> Section 18.2.5 of the EPICS Application Developer's Guide (3.14.11) describes the built-in iocsh commands. It lists a "show" command. But in my soft IOCs this command is not present. Am I missing something in my build, or is the documentation wrong?
>
> Thanks,
> Mark
>
>
--
Eric Norum
[email protected]
- Replies:
- RE: Missing iocsh command? Mark Rivers
- References:
- Missing iocsh command? Mark Rivers
- Navigate by Date:
- Prev:
Missing iocsh command? Mark Rivers
- Next:
Solaris version and edm John William Sinclair
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Missing iocsh command? Mark Rivers
- Next:
RE: Missing iocsh command? Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024