Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <20102011  2012  2013  2014  2015  2016  2017  2018  2019  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <20102011  2012  2013  2014  2015  2016  2017  2018  2019 
<== Date ==> <== Thread ==>

Subject: RE: Missing iocsh command?
From: "Mark Rivers" <rivers@cars.uchicago.edu>
To: "Eric Norum" <eric@norum.ca>
Cc: tech-talk@aps.anl.gov
Date: Mon, 29 Mar 2010 12:51:12 -0500
Hi Eric,

Thanks for the information.  It seems like renaming "thread" to
epicsThreadShow would be more consistent.

More importantly, the "-level" argument does not seem to provide any
additional information, at least on Linux or vxWorks.  It would be very
helpful if higher levels could print additional information like stack
usage, etc.

On vxWorks the following command:

thread -5 taskwd

does not restrict its output to the taskwd thread.  In fact it just
prints out the entire thread list twice.

Mark


-----Original Message-----
From: Eric Norum [mailto:eric@norum.ca] 
Sent: Sunday, March 28, 2010 9:37 PM
To: Mark Rivers
Cc: tech-talk@aps.anl.gov
Subject: Re: Missing iocsh command?

It looks like somewhere along the line this got changed to 'thread' --
see src/libCom/iocsh/libComRegister.c around line 204.
There's also 'epicsThreadShowAll' which isn't in the app dev guide iocsh
command descriptions at all.

I think that changing the documentation is probably the right thing to
do ('show' should become 'thread' and 'epicsThreadShowAll' should be
added).

Alternatively, should 'show' become 'epicsThreadShow' in the
documentation and 'thread' become epicsThreadShow in the code?

On Mar 28, 2010, at 7:18 PM, Mark Rivers wrote:

> Folks,
> 
> Section 18.2.5 of the EPICS Application Developer's Guide (3.14.11)
describes the built-in iocsh commands.  It lists a "show" command.  But
in my soft IOCs this command is not present.  Am I missing something in
my build, or is the documentation wrong?
> 
> Thanks,
> Mark
> 
> 

-- 
Eric Norum
eric@norum.ca






Replies:
Re: Missing iocsh command? Eric Norum
References:
Missing iocsh command? Mark Rivers
Re: Missing iocsh command? Eric Norum

Navigate by Date:
Prev: Solaris version and edm John William Sinclair
Next: Re: Missing iocsh command? Eric Norum
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <20102011  2012  2013  2014  2015  2016  2017  2018  2019 
Navigate by Thread:
Prev: Re: Missing iocsh command? Eric Norum
Next: Re: Missing iocsh command? Eric Norum
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <20102011  2012  2013  2014  2015  2016  2017  2018  2019 
ANJ, 02 Sep 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·