Experimental Physics and Industrial Control System
Subject: |
Using Motor Record with READBACK Deadband and number of Retries. |
From: |
"Ernest L. Williams Jr." <[email protected]> |
To: |
Tech-talk <[email protected]> |
Date: |
Wed, 14 Jul 2010 17:15:55 -0700 |
Hi,
We are currently using "Motor Record Version 5.9"
on some of our stepper motor applications.
We would like to use the motor software with USE READBACK enabled.
We are connecting our calibrated LVDT to the READBACK link.
What has been your experience in using this feature of the Motor Record?
When using READBACK inlink for Motor position sensing:
(1) Selecting YES/NO does not update the motor record properly.
Should the software actually copy the contents of MOTOR.VAL to MOTOR.RBV
If READBACK is toggled back to "NO"
If the READBACK is set to "YES" then "MOTOR.RDBL", should be copied to MOTOR.RBV ?
Thanks in Advance,
Ernest
SLAC
- Replies:
- RE: Using Motor Record with READBACK Deadband and number of Retries. Rarback, Harvey M.
- Re: Using Motor Record with READBACK Deadband and number of Retries. Ron Sluiter
- Navigate by Date:
- Prev:
RE: MAXv "spurious" command errors austen.rose
- Next:
EDM x-y plot crash Euan.Troup
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: MAXv "spurious" command errors austen.rose
- Next:
RE: Using Motor Record with READBACK Deadband and number of Retries. Rarback, Harvey M.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024