I am trying to compile SDDS on Linux (CENTOS 4.8 w/ Kernel 2.6.9-89.0.25)
with EPICS base R3.14.4. I keep getting the following compile error. Any
suggestions?
I was not find libXaw.a file our linux system but I found libXaw.so our
system.
**to start error messages ***
make[1]: Entering directory
`/home/post/skumar/Elegant/epics/extensions/src/SDDS/SDDSaps/sddsplots'
make -C O.linux-x86_64 -f ../Makefile TOP=../../../../.. T_A=linux-x86_64
install
make[2]: Entering directory
`/home/post/skumar/Elegant/epics/extensions/src/SDDS/SDDSaps/sddsplots/O.lin
ux-x86_64'
make[2]: *** No rule to make target `/usr/lib64/libXaw.a', needed by
`sddsplot'. Stop.
make[2]: Leaving directory
`/home/post/skumar/Elegant/epics/extensions/src/SDDS/SDDSaps/sddsplots/O.lin
ux-x86_64'
make[1]: *** [install.linux-x86_64] Error 2
make[1]: Leaving directory
`/home/post/skumar/Elegant/epics/extensions/src/SDDS/SDDSaps/sddsplots'
make: *** [SDDSaps/sddsplots.install] Error 2
** end ***
From Ahn, Si Won,
computer system administrator
Physics Dept. POSTECH
San 31 Hyoja-Dong, Namku Phone: (Korea) 054 279 2760
Pohang, Kyungbuk 790-784 Mobile Phone: 010 3131 2760
Republic of KOREA E-mail: [email protected]
