Experimental Physics and Industrial Control System
The cross compiler alone solves only half of the problem. If you want to
use the hardware floating point support you need support libraries.
If you have a Windows version of the cross compiler you probably have
the support libraries. Otherwise you will not be able to use hardware
floating point.
王林 wrote:
> Hello,
> Thanks for your advice.Actually,I very want to know that if vxWorks5.5.1
> and the CPU board remain unchanged,is it advisable to improve the
> crossgcc2.9.6 and make it support PPC85xx? Or is there any way to
> extract the cross compiler from Tornado? So far,I have a
> Tornado2.2.1(Windows version)supporting PPC85xx.
> And if possible,what is the workload? How difficult is it?
> Thanks
>
> Wang Lin
- References:
- RE:RE: cross-gcc-2.9.6 problem 王林
- Navigate by Date:
- Prev:
R3.14.12-rc1 delayed Andrew Johnson
- Next:
Re: R3.14.12-rc1 delayed Martin L. Smith
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE:RE: cross-gcc-2.9.6 problem 王林
- Next:
MEDM btn3 mouse/X11 problems on GNOME x64 (Ubuntu 10.04) Angus Gratton
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024