1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | sscan and averaging [SEC=UNCLASSIFIED] |
From: | "LYNCH, Damien" <[email protected]> |
To: | <[email protected]> |
Date: | Fri, 14 Jan 2011 12:00:44 +1100 |
Hi, We have a sscan record setup to allow operators to scan over
a sample in an ion source. Currently the data read at each scan position is
whatever the detector is reading at that instant. We would like to acquire
several times at each position and take the average. What is the best way of
doing this? Should I set up a multidimensional scan and set the ACQM field in
the inner sscan record to ACCUMULATE and perform the averaging elsewhere after
the scan is finished? Thanks, Damien Lynch Accelerator IT Systems Engineer Institute of Environmental Research Australian Nuclear Science and Technology
Organisation Locked Bag 2001 Important: This transmission is intended
only for the use of the addressee. It is confidential and may contain
privileged information or copyright material. If you are not the intended
recipient, any use or further disclosure of this communication is strictly
forbidden. If you have received this transmission in error, please notify me
immediately by telephone and delete all copies of this transmission as well as
any attachments. |