1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: Problem exiting IOC |
From: | "Vigder, Mark" <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Wed, 19 Jan 2011 17:01:41 -0500 |
Could be that bug. When I ran it on EPICS 3.14.11 it kept recursing and spitting out error messages until the stack overflowed.
Mark
possibly it’s this bug
https://bugs.launchpad.net/epics-base/+bug/693534
Jeff
From: [email protected] [mailto:[email protected]]
On Behalf Of Daron Chabot
Hi Mark,
I too observed this condition only yesterday, and have not had a chance to investigate. I was using New Focus Pico motors, not MDrive hardware.
If I exited the EPICS ioc-shell using the command, "exit", the problem appeared. This would lead me to start my search for code that has hooked into the iocsh exit routines (atexit ).
Note: things appeared to shutdown cleanly if I exited with a ctrl-c.
Perhaps someone more familiar with those different code paths can comment further and narrow down the search...?
-- dc On Wed, Jan 19, 2011 at 2:58 PM, Vigder, Mark <[email protected]> wrote: I'm yet another EPICS newbie. I've got a simple softIOC up and running
|