Hi Paweł,
On Tuesday 25 January 2011 09:17:08 Paweł Prędki wrote:
The thing is the HIHI, HIGH, LOW and LOLO values are initialized in the
record but BOY doesn't seem to be loading them. The record I'm referring
to is as follows:
record(ao,DISK:FORWARDING") {
field(DESC,"Forwarding Throughput")
field(DTYP,"Raw Soft Channel")
field(EGU,"Gbps")
field(OMSL,"supervisory")
field(DRVL,0.0)
field(DRVH,10.0)
field(LOPR,0.0)
field(HOPR,10.0)
field(HIHI,8.0)
field(HIGH,7.0);
field(LOW, 1.0);
field(LOLO,0.0)
}
The IOC also checks that you have something other than NO_ALARM in the
relevant xxSV field before it will provide the limit through CA, otherwise it
would have no way to tell whether your LOLO limit is an alarm limit or just
the default value for the LOLO field. You must set LLSV, LOSV, HISV and HHSV
if you want those values made available to BOY.
- Andrew