epics/support/mcaR6-12-4/mcaApp/Db/icb_adc.db", "P=mcaTest:,ADC=adc1,PORT=icbAdc1")
icbConfig("icbAmp1", 781, 2, 1)
icbConfig: Error looking up ICB module NI30D:2
dbLoadRecords("/cygdrive/c/epics/support/mcaR6-12-4/mcaApp/Db/icb_amp.db", "P=mcaTest:,AMP=amp1,PORT=icbAmp1")
When mcaAIMShowModules runs, the result looks bad (no Owner name, not the typical nonzero Owner ID):
mcaAIMShowModules
Module Type HW rev. FW rev. Owner name Owner ID Status Memory size Free address
NI000781 1 0 6 00:00:00:00:00:00 Reachable 261116 00000000
When the IOC starts, the first error has to do with save_restore. I don't think this is an issue I care about, but it might be:
iocInit()
Starting iocInit
##############################
##############################################
## EPICS R3.14.12 $Date: Wed 2010-11-24 14:50:38 -0600$
## EPICS Base built Feb 1 2011
############################################################################
reboot_restore: entry for file 'auto_settings.sav'
reboot_restore (v4.12): entry for file 'auto_settings.sav'
reboot_restore: Found filename 'auto_settings.sav' in restoreFileList.
*** restoring from 'c:/epics/support/mcaR6-12-4/iocBoot/iocCygwin/autosave/auto_settings.sav' at initHookState 6 (before record/device init) ***
cygwin warning:
MS-DOS style path detected: c:/epics/support/mcaR6-12-4/iocBoot/iocCygwin/autosave/auto_settings.sav
Preferred POSIX equivalent is: /cygdrive/c/epics/support/mcaR6-12-4/iocBoot/iocCygwin/autosave/auto_settings.sav
CYGWIN environment variable option "nodosfilewarning" turns off this warning.
Consult the user's guide for more details about POSIX paths:
http://cygwin.com/cygwin-ug-net/using.html#using-pathnames
save_restore: Can't open file 'c:/epics/support/mcaR6-12-4/iocBoot/iocCygwin/autosave/auto_settings.sav'.
save_restore: Trying backup file 'c:/epics/support/mcaR6-12-4/iocBoot/iocCygwin/autosave/auto_settings.savB'
save_restore: Can't open file 'c:/epics/support/mcaR6-12-4/iocBoot/iocCygwin/autosave/auto_settings.savB'.
save_restore: Can't figure out which seq file is most recent,
save_restore: so I'm just going to start with 'c:/epics/support/mcaR6-12-4/iocBoot/iocCygwin/autosave/auto_settings.sav0'.
save_restore: Trying backup file 'c:/epics/support/mcaR6-12-4/iocBoot/iocCygwin/autosave/auto_settings.sav0'
save_restore: Can't open file 'c:/epics/support/mcaR6-12-4/iocBoot/iocCygwin/autosave/auto_settings.sav0'.
save_restore: Trying backup file 'c:/epics/support/mcaR6-12-4/iocBoot/iocCygwin/autosave/auto_settings.sav1'
save_restore: Can't open file 'c:/epics/support/mcaR6-12-4/iocBoot/iocCygwin/autosave/auto_settings.sav1'.
save_restore: Trying backup file 'c:/epics/support/mcaR6-12-4/iocBoot/iocCygwin/autosave/auto_settings.sav2'
save_restore: Can't open file 'c:/epics/support/mcaR6-12-4/iocBoot/iocCygwin/autosave/auto_settings.sav2'.
save_restore: Can't find a file to restore from...save_restore: ...last tried 'c:/epics/support/mcaR6-12-4/iocBoot/iocCygwin/autosave/auto_settings.sav2'. I give up.
save_restore: **********************************
Then comes a whole stew of errors (these are just excerpts, large chunks of identical messages are omitted):
save_restore: Can't open save file.2011/02/02 01:24:52.441 drvIcbAsyn::verifyModule module not defined or not found
2011/02/02 01:24:52.441 drvIcbAsyn::verifyModule module not defined or not found
2011/02/02 01:24:52.441 drvIcbAsyn::verifyModule module not defined or not found
2011/02/02 01:24:52.441 drvIcbAsyn::verifyModule module not defined or not found
2011/02/02 01:24:52.441 devMcaAsyn::init_record, mcaTest:aim_adc1 connectDevice failed to MCS
2011/02/02
01:24:52.441 devMcaAsyn::send_msg: mcaTest:aim_adc1 error calling
queueRequest, asynManager::queueRequest asynUser not associated with a
port
2011/02/02 01:24:52.441 devMcaAsyn::send_msg: mcaTest:aim_adc1 error
calling queueRequest, asynManager::queueRequest asynUser not associated
with a port
2011/02/02 01:24:52.441 devMcaAsyn::init_record, mcaTest:aim_adc1 connectDevice failed to MCS
2011/02/02 01:24:52.441 devMcaAsyn::send_msg: mcaTest:aim_adc1 error
calling queueRequest, asynManager::queueRequest asynUser not associated
with a port
2011/02/02 01:24:52.441 devMcaAsyn::send_msg:
mcaTest:aim_adc1 error calling queueRequest, asynManager::queueRequest
asynUser not associated with a port
save_restore: Can't open save file.2011/02/02 01:24:52.972 drvIcbAsyn::verifyModule module not defined or not found
2011/02/02 01:24:52.972 mcaTest:adc1LLD devAsynFloat64 process error
2011/02/02 01:24:52.972 drvIcbAsyn::verifyModule module not defined or not found
2011/02/02 01:24:52.972 mcaTest:adc1OFFSET devAsynFloat64 process error
2011/02/02 01:24:52.972 drvIcbAsyn::verifyModule module not defined or not found
2011/02/02 01:24:52.972 mcaTest:adc1ULD devAsynFloat64 process error
2011/02/02 01:24:52.972 drvIcbAsyn::verifyModule module not defined or not found
2011/02/02 01:24:52.972 mcaTest:adc1ZERO devAsynFloat64 process error
2011/02/02 01:24:52.972 drvIcbAsyn::verifyModule module not defined or not found