Experimental Physics and Industrial Control System
To all EPICS CAN experts,
We are about to construct a 3000 channel CAN system. Please contact me
if you have any experience controlling CAN buses from EPICS.
Our current thought is to use about 8 Anagate Ethernet-to-CAN
controllers, four channels per controller, to talk to the CAN devices,
about 100 devices per CAN bus. We'd use the ASYN framework to implement
the driver that talks to the Anagate devices (they communicate via TCP/IP).
I am open to suggestions and alternative solutions. I am especially
interested in existing drivers for any type of Ethernet-based CAN
controller so that we can avoid writing a new driver.
Also, is the ASYN framework the best choice if we have to develop a new
driver?
Finally, to Marty Kraimer et al: is the Java IOC and port driver
framework ready? Might we use this instead?
Thanks,
--
Sincerely,
Elliott
================================================================================
Those raised in a morally relative or neutral environment will hold
no truths to be self-evident.
Elliott Wolin
Staff Physicist, Jefferson Lab
12000 Jefferson Ave
Suite 8 MS 12A1
Newport News, VA 23606
757-269-7365
================================================================================
- Replies:
- Re: EPICS and large CAN systems Burkhard Kolb
- Re: EPICS and large CAN systems Rod Nussbaumer
- Navigate by Date:
- Prev:
RE: Autosave config file Abadie Lana
- Next:
Re: EPICS and large CAN systems Burkhard Kolb
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
KEK/J-PARC after the eatrhquake on March11 上窪田@KEKTokai
- Next:
Re: EPICS and large CAN systems Burkhard Kolb
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024