| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Area Detector |
| From: | "Szalata, Zenon M." <[email protected]> |
| To: | Rivers Mark <[email protected]> |
| Cc: | "[email protected]" <[email protected]> |
| Date: | Wed, 11 May 2011 09:00:15 -0700 |
Hi Mark, We have a few AVT GX1910 GigE cameras. Area Detector works fine with these cameras with one exception. Changing Data Type from Mono8 to Mono16 generates and error: “… error, status=4, function=7, value=3” followed by “… 13PS1:cam1:DataType devAsynInt32 process error” The camera support Mono16 and can be put in this mode from GigEViewer program. Is there anything that I can do to overcome this difficulty? Is this feature working for other AVT cameras? Many thanks in advance, Zen |