Experimental Physics and
Industrial Control System

I have only seen that error on the color cameras, which don’t support 16-bits even in mono mode.

 

I will test again on a GC1380H camera, where I know it used to work fine.

 

Mark

 

 

 

Hi Mark,

We have a few AVT GX1910 GigE cameras.  Area Detector works fine with these cameras with one exception.

Changing Data Type from Mono8 to Mono16 generates and error:

“… error, status=4, function=7, value=3” followed by

“… 13PS1:cam1:DataType devAsynInt32 process error”

 

The camera support Mono16 and can be put in this mode from GigEViewer program.

Is there anything that I can do to overcome this difficulty?

Is this feature working for other AVT cameras?

 

Many thanks in advance,

Zen