EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <2011>  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <2011>  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: EPICS on Delta Tau Power PMAC
From: Bill Cruise <[email protected]>
To: [email protected]
Date: Tue, 31 May 2011 18:08:05 -1000
I recently took the Turbo PMAC class at Delta Tau and was told that their newest PMAC motion controller version, the Power PMAC, can run EPICS. It is even in their sales brochures. If we can move parts of our application inside a Power PMAC, it looks like it can provide a big improvement to an upgrade project we are doing.
But, before jumping into this, I'd like to know if any EPICS folks are running EPICS on the Power PMAC and what your experiences have been. 

Thanks for any help,

Bill Cruise
Canada-France-Hawaii Telescope
Replies:
RE: EPICS on Delta Tau Power PMAC Dalesio, Leo
RE: EPICS on Delta Tau Power PMAC Mark Rivers
Re: EPICS on Delta Tau Power PMAC Krzysztof Lazarski
Navigate by Date:
Prev: Sequencer news: latest snapshot builds and runs under Windows Benjamin Franksen
Next: Re: Xenomai Linux Dirk Zimoch
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <2011>  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Sequencer news: latest snapshot builds and runs under Windows Benjamin Franksen
Next: RE: EPICS on Delta Tau Power PMAC Dalesio, Leo
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <2011>  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024