Experimental Physics and Industrial Control System
The difference is that -DMY_DO_BOOTP=rtems_bsdnet_do_bootp tells the BSP to get the board network configuration from a BOOTP/DHCP server while -DMY_DO_BOOTP=NULL tells the BSP to get the network configuration from the NVRAM.
On Jan 3, 2012, at 7:46 PM, Michael Davidsaver wrote:
> Hello Qazi,
>
> There is support in RTEMS for the mvme2307 which is used with epics at
> NSLS. The epics build config used (see attached) is very similar to
> that of the mvme2100.
>
> The only real difference that I can see from the 2100 config is
>
>> #ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
>> ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=rtems_bsdnet_do_bootp
>
> I don't know what necessitated this though.
>
> I hope that this is helpful.
>
> Michael
>
--
Eric Norum
[email protected]
- Replies:
- Re: RTEMS-MVME2300 Qazi Zia-ul-Haque
- References:
- Re: RTEMS-MVME2300 Michael Davidsaver
- Navigate by Date:
- Prev:
Re: autosave application loading error Williams Jr., Ernest L.
- Next:
Re: Re: autosave application loading error Zhang Yuliang
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: RTEMS-MVME2300 Michael Davidsaver
- Next:
Re: RTEMS-MVME2300 Qazi Zia-ul-Haque
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024