EPICS RE: mrfioc2 compile error

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	RE: mrfioc2 compile error
From:	"Davidsaver, Michael" <[email protected]>
To:	"'Paul Hamadyk'" <[email protected]>, 송영기 <[email protected]>
Cc:	"[email protected]" <[email protected]>
Date:	Fri, 20 Apr 2012 16:26:27 +0000

Hi Paul,

> -----Original Message-----
> ...
> I had the same problem, and I think was the version of g++. I was using
> 4.1.2.
> 
> In devObjWf.cpp I replaced <epicsInt32[]> with <epicsInt32 *>,
> <epicsInt8[]> with <epicsInt8 *> etc, and then it built correctly.

Yes this was the result of my not testing with "old" GCC versions...

http://epics.hg.sourceforge.net/hgweb/epics/mrfioc2/rev/2e50666ecbdd


My apologizes for the delay in making a release with this fix.  I'm hoping to get 2.0.1 out the door Real Soon Now.


Michael

References:: mrfioc2 compile error 송영기; Re: mrfioc2 compile error Paul Hamadyk

Navigate by Date:: Prev: Re: mrfioc2 compile error Paul Hamadyk; Next: RE: Problem: Example IOC in RTEMS-MVME2304 Hill, Jeffrey O; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Re: mrfioc2 compile error Paul Hamadyk; Next: Re: RE: mrfioc2 compile error 송영기; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024