1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | LabVIEW EPICS connection |
From: | "Steve Kinder" <[email protected]> |
To: | "tech-talk" <[email protected]> |
Date: | Thu, 28 Jun 2012 10:02:53 +0100 |
I am trying to connect an existing LabVIEW VI to EPICS via the freely
available LabVIEW add-on EPICS Client I/O Server (http://joule.ni.com/nidu/cds/view/p/id/2533/lang/en).
I am running LabVIEW 2011 and have a 3-14-11 soft IOC running on the same system
with a few test PVs. My first aim is to make a connection between these PVs and
elements of the LabVIEW VI (currently just a test VI). I wondered whether anyone
had successfully used this LabVIEW add-on or the full version as in the DSC/RT
add-ons and could offer me advice on how to make the connection.
I have the following in my test LabVIEW VI; Create EPICS VI, Deploy EPICS
Client VI and List Records VI. I was hoping that the latter would display a list
of records in my soft IOC if the connection had been established. I get no
errors but it doesn’t seem to display any records.
Any advice would be appreciated, perhaps including whether I should be
trying to use this LabVIEW add-on or one of the other options e.g. CA Lab or the
Oak Ridge CA client.
Many Thanks
Steve
|