| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: EPICS build on armv6l |
| From: | Metin Aydar <[email protected]> |
| To: | "[email protected]" <[email protected]> |
| Cc: | "[email protected]" <[email protected]> |
| Date: | Thu, 9 Aug 2012 08:41:19 +0300 |
| Hi all, As you can find on the link: http://www.aps.anl.gov/epics/base/R3-15, EPICS base is ready to test on RPi hosts. Now, it supports ARM host based setup! It was hard to port other architecture files to linux-arm in previous version. I've downloaded the base and gave a chance to run on RPi, every command i wrote was successfully run... EpicsHostArch script in startup directory gives "linux-arm" as host arch. It took about an hour to set up new base. After setting up new base, i run selftest command: "make runtest". All tests passed successfully. In addition to base module; probe and medm extensions can be set up. They all are working properly. I just used lesstif2-dev package instead of libmotif-dev. And i could setup java runtime version 6-dev to run visualdct.. Regards, Metin. --- Ankara University Institute of Accelerator Technologies Control Systems Division |