| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: DBE_PROPERTY and CSS Re: Using CAJ in production (DBE_PROPERTY and CA gateway) |
| From: | Michael Davidsaver <[email protected]> |
| To: | "Kasemir, Kay" <[email protected]> |
| Cc: | "[email protected]" <[email protected]> |
| Date: | Fri, 30 Nov 2012 16:41:42 -0500 |
On 11/30/2012 12:50 PM, Kasemir, Kay wrote:
On 11/30/12 12:30 , "Andrew Johnson" <[email protected]> wrote:4) Why does CSS delete the monitor before issuing a put?That is an interesting question...Not sure what that means. Who saw that happening where?
Me observing with wireshark.
With CSS "Probe"
Both Probe and BOY.
or ..? Talking to an older IOC or one that supports DBE_PROPERTY? Using a gateway or not?
The IOC (and gateway) were build against Base 3.14.11. Direct connection to the IOC works. From my memory, the CA gateway was not forwarding the monitor create request at all, so the IOC version makes no difference in this case.
... So by default we disabled the DBE_PROPERTY support. It's a CSS preference setting.
Unfortunately we seem to have a css distribution version (css-nsls2 3.1.2) where this defaults to enabled and can't be disabled :(
I suspect we will pick up the improved behavior you describe in our next upgrade.
Michael