1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Tektronix 3014 Tracing Problem |
From: | "Nicholas P. DiMonte" <[email protected]> |
To: | Trevor Downer <[email protected]> |
Cc: | EPICS Tech Talk <[email protected]> |
Date: | Mon, 10 Dec 2012 09:21:58 -0600 |
Trevor, Do you see waveforms on the scope? if so, select the "ACQUIRE" page and click on "Stop/Rd/Run" button a couple of times or change scan from "Passive" to "2 seconds". Nick D. On 12/7/2012 7:35 PM, Trevor Downer wrote: Hello again! We were able to get the cartesian plot function to work. I attached a screenshot of the display after our success. Thanks for your help with that! The problem was with the MEDM installation, so I re-installed MEDM. We were able to make a cartesian plot correctly using another application. However, we still are not getting the trace data from the oscilloscope. I attached screenshot is of the result that I get when I run the caget command on one of the wave form records. This is the same result that I get for the other waveform records as well. We tried changing the EPICS_CA_MAX_ARRAY_BYTES variable in the environment, the envParams, and the st.cmd script from 10000 to 100000000, but to no avail as we are still not able to get a trace. We also tried changing the NELM field in the waveform records from 10000 to 100000 and bigger, and we had the same result. Any help that you can give us would be greatly appreciated! Thanks On Fri, Dec 7, 2012 at 12:10 PM, Hartman, Steven M. <[email protected]> wrote:On Dec 6, 2012, at 11:51 PM, Yujong Kim wrote:We can control all main functions of the scope from EPICS MEDM OPI panels without any problem.Hi Yujong-- To isolate whether this is an medm configuration issue or a CA configuration issue (e.g., EPICS_CA_MAX_ARRAY_BYTES), try to caget the waveform from the computer running medm. -- Steven Hartman [email protected] |