RE: Problem in installing asyn4-19

[Mark Rivers <rivers@cars.uchicago.edu>]

You need to do 1 of 2 things:

 

1) Comment out the line like the following uin asyn/configure/RELEASE

 

SNCSEQ=$(SUPPORT)/seq-2-1-10

 

or

 

2) Build the EPICS “seq” module and set the SNCSEQ line in RELEASE to point to it.

 

Mark

 

 

From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of Priyabrata Jenamani
Sent: Tuesday, April 16, 2013 6:41 AM
To: tech-talk@aps.anl.gov
Subject: Problem in installing asyn4-19

 

Dear All,

I am facing problem when installing asyn 4-19 with base 3.14.12.2 error is shown below. Please help me.

make[3]: *** No rule to make target `ipSNCServer.o', needed by `libtestIPServerSupport.a'.  Stop.
make[3]: Leaving directory `/home/jenamani/epics/modbus/asyn4-19/testIPServerApp/src/O.linux-x86_64'
make[2]: *** [install.linux-x86_64] Error 2
make[2]: Leaving directory `/home/jenamani/epics/modbus/asyn4-19/testIPServerApp/src'
make[1]: *** [src.install] Error 2
make[1]: Leaving directory `/home/jenamani/epics/modbus/asyn4-19/testIPServerApp'
make: *** [testIPServerApp.install] Error 2

Priyabrata Jenamani