1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | EPID soft ioc slow feedback |
From: | Miroslav Mihaylov <[email protected]> |
To: | EPICS tech-talk <[email protected]> |
Date: | Mon, 20 May 2013 11:56:59 -0500 |
Hello. I am trying to implement the EPID record in my current software ioc. I have a Keithley 2000 multimeter and Animatics smart motor. I want to move the motor by some small step every time the voltage from the Keithley reading drifts away from some predefined setpoint. I have the std module compiled. Also in my ioc src/Makefile I included the iocxxxLinux_DBD += epidRecord.dbd In my ioc st.cmd file do I need to load some template and/or record? Is there any medm gui for the slow feedback. The medm screen from xxx.adl->"ADC"->"Slow Feedback" is inactive. Thanks Miroslav