1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Changing SCAN field in many records |
From: | Hinko Kočevar <[email protected]> |
To: | Tim Mooney <[email protected]> |
Cc: | [email protected] |
Date: | Thu, 13 Jun 2013 08:36:19 +0200 |
On 06/07/2013 04:17 PM, Tim Mooney wrote:
Hi Hinko, I would do this with a seq record.
Dear Tim, Thanks for the suggestion. Will give it a go. Best Regards, Hinko
Tim ----- Original Message -----From: "Hinko Kočevar" <[email protected]> To: [email protected] Sent: Friday, June 7, 2013 1:56:12 AM Subject: Changing SCAN field in many records Hi, We would like to set a SCAN field on several lower level BO records, at the same time, and the value of these SCAN fields should reflect the value of the single higher level record SCAN field. For the control of these lower level SCAN fields another, higher level record, would be used. If a user wishes to set individual lower level record SCAN fields, she is allowed. OTOH, when changing the SCAN of the higher level record, ALL lower lever BO records would get their SCAN field set too. Is it possible to get this done without using a sequencer? TIA and HAND, Hinko