| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Motor field "UEIP" cause |
| From: | 汪启胜 <[email protected]> |
| To: | <[email protected]> |
| Date: | Sat, 31 Aug 2013 17:02:45 +0800 |
|
Dear all, I have a similar behavior as the thread http://www.aps.anl.gov/epics/tech-talk/2010/msg00906.php
which posted at 2010. But it occurs when I change the field UEIP anytime. At
first, I wrote the UEIP in the motor template, the message “drvMAXv.cc:motorIsr:
command error ? card 00” will cause the ioc initialize failed. After remove the
field in the db field, the ioc can be loaded successfully and running without
problem. But I have encoder, so when I set UEIP to Yes or No, the message come
out in console, while the ioc do not crash, and the encoder works also. By the way, I also saw the timing problem
when ioc boot, I got the message like "***MAXv card #Disabled*** Watchdog
Timeout CTR =" The controller is a mvme5500 running with
vxworks, Tornado 2.6. The version of motor is 6-7-1. Any suggestion to remove
these messages is appreciated. Best Regards, Qisheng |