1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: No reply from device within 1000 ms |
From: | "Martin L. Smith" <[email protected]> |
To: | [email protected] |
Date: | Thu, 05 Sep 2013 09:18:44 -0500 |
Yasemin, That typically means that the device is not responding to your command, at least not within the default timeout of 1000 ms. Are you using the same serial cable as you did with cutecom and the same comm port parameters? If you have a serial analyzer that you can put between the device and the cable that would at least tell you if the device is getting the command. Marty On 09/05/13 08:18, Yasemin Barutçu wrote:
Hello, I've been trying to connect to power supply by RS232. When I try the connection with cutecom everythings work fine. But after creating an epics application and send the "*IDN?" command I get following warning and can't read anything. 2013/09/05 16:15:56.265500 serial IDN: No reply from device within 1000 ms Thanks, Yasemin Barutçu