Welcome to RTEMS GeSys
This system $Name: $ was built on 20090323EDT11:17:38
$Id: init.c,v 1.42 2007-09-11 17:39:48 till Exp $
Installing TIOCGWINSZ line discipline: ok.
To skip initialization, press a key now...
Going to probe for Ethernet chips when initializing networking:
(supported are 3c509 (ISA), 3c90x (PCI) and eepro100 (PCI) variants).
NOTES:
- Initializing a 3c90x may take a LONG time (~1min); PLUS: it NEEDS
media
autonegotiation!
- A BOOTP/DHCP server must supply my IF configuration
(ip address, mask, [gateway, dns, ntp])
Ethernet address 0:E0:4B:2B:9E:E4
PCI IDs: 0x8086 0x1209 0x8086 0x70 0x10
Chip Type: 0
dec2114x : device 'dc1' not found on PCI bus
etherlink : No Etherlink devices found
3C509: attach() called.
3C509: isa_probe() looking for a card...
3C509: isa_probe() fail to find a board.
bootpc_init: using network interface 'fxp1'
bootpc hw address is 0:e0:4b:2b:9e:e4
My ip address is 129 .57 .228 .69
Domain Name Server is 129 .57 .228 .40
Domain Name Server is 129 .57 .32 .100
Ignoring BOOTP/DHCP option code 150
Time Server is 129 .57 .228 .40
Time Server is 129 .57 .32 .100
Domain name is acc.jlab.org
Server name is 129.57.228.40
Boot file is /cs/dvl/iocs/iocpct3/boot/pxegrub
Subnet mask is 255 .255 .252 .0
Server ip address is 129 .57 .228 .40
Gateway ip address is 129 .57 .228 .1
Log server ip address is 129 .57 .250 .11
This is RTEMS-RPCIOD Release $Name: R_rtems_nfs_1_5 $
($Id: rpcio.c,v 1.42 2007/06/12 04:47:25 strauman Exp $)
Till Straumann, Stanford/SLAC/SSRL 2002
See LICENSE file for licensing info
This is RTEMS-NFS Release $Name: R_rtems_nfs_1_5 $
($Id: nfs.c,v 1.48 2007/06/12 04:47:25 strauman Exp $)
Till Straumann, Stanford/SLAC/SSRL 2002
See LICENSE file for licensing info
Trying to synchronize NTP...OK
Trying to mount 129.57.228.40:/cs/dvl on /boot
Change Dir to '/boot/iocs/iocpct3/'
Trying symfile 'BUILTIN', system script 'st.sys'
Type 'cexpsh.help()' for help (no quotes)
'st.sys':
# IOC: iocpct3
# Location:
ld = cexpModuleLoad
0x00107054 (1077332)
unld = cexpModuleUnload
0x001079c8 (1079752)
lsmod = cexpModuleInfo
0x00107fe0 (1081312)
rtems_rpc_start_portmapper(50)
0x00000000 (0)
#
chdir ("/boot")
0x00000000 (0)
< iocs/Gesys-Rtems/misc/mnt_cfg.init
<'iocs/Gesys-Rtems/misc/mnt_cfg.init':
nfsMount("devfs.acc.jlab.org","/cs/dvl","/cs/dvl")
Trying to mount 129.57.228.40:/cs/dvl on /cs/dvl
0x00000000 (0)
mkdir("/usr",0777)
0x00000000 (0)
mkdir("/usr/llapp4",0777)
0x00000000 (0)
nfsMount("devfs.acc.jlab.org","/usr/llapp4","/usr/llapp4")
Trying to mount 129.57.228.40:/usr/llapp4 on /usr/llapp4
0x00000000 (0)
#
# Define HOME to op area
HOME = "/cs/dvl/iocs/iocpct3"
0x008d5ee0 (9264864)
chdir (HOME)
0x00000000 (0)
#
ld("rtemsV/ioUtil.obj")
0x008d6020 (9265184)
ld("rtemsV/miscUtils.obj")
0x008d8740 (9275200)
ld("rtemsV/ntpclock.obj") && rtemsNtpInitialize(0,0)
Trying to contact NTP server; (timeout ~1min.)... OK
NTP synchro code initialized; this is EXPERIMENTAL
WARNING: High resolution clock not implemented for this CPU
please contribute to <ntpNanoclock/pcc.h>
0x00000000 (0)
setenv("TZ","EST5EDT,M 3.2.0,M 11.1.0",1)
0x00000000 (0)
tzset()
0x00000000 (0)
setenv("STARTUP","st.sys",1)
0x00000000 (0)
setenv("ST_CMD","st.cmd",1)
0x00000000 (0)
setenv("ENGINEER","withers",1)
0x00000000 (0)
setenv("LOCATION","Hall A",1)
0x00000000 (0)
sethostname("devfs",6)
0x00000000 (0)
ansiTiocGwinszInstall(0)
0x00000000 (0)
#####< st.cmd
Type 'cexpsh.help()' for help (no quotes)
Cexp><st.cmd
'st.cmd':
## Analogouse to startup.all
## You may have to change test to something else
## everywhere it appears in this file
setenv("EPICS_CA_MAX_ARRAY_BYTES","100000")
0x00000000 (0)
##############################################
# Load Application Executable (that used cexpModuleLoad)
##############################################
<startup.iocpct3Apps.obj
<'startup.iocpct3Apps.obj':
# IOC: <IOC_TAG>
# APP: iocpct3Apps
# First load (objects)
iocpct3Apps_loaded=1
0x00000001 (1)
# load module for <iocpct3Apps>
#cexpModuleLoad("iocpct3AppsO/iocpct3Apps.obj")
cexpModuleLoad("iocpct3AppsO/iocpct3Apps")
Symbol 'getch' already exists
Symbol 'console_read' already exists
Symbol 'BSP_install_rtems_irq_handler' already exists
Symbol 'finite' already exists
Symbol 'access_modes_assoc' already exists
Symbol 'herror' already exists
Symbol '__ieee754_log10' already exists
Symbol 'rt_ifmsg' already exists
Symbol 'MOU_Init' already exists
Symbol 'rtems_termios_dequeue_characters' already exists
Symbol 'rtems_libio_number_iops' already exists
Symbol '_Priority_Major_bit_map' already exists
Symbol 'rtems_gxx_key_delete' already exists
Symbol 'rip_ctloutput' already exists
Symbol 'rtems_task_create' already exists
Symbol '_Event_Sync_state' already exists
Symbol 'hard_math' already exists
Symbol '_TOD_Get' already exists
Symbol '_TOD_Get_uptime' already exists
Symbol '_ZN10__cxxabiv119__pointer_type_infoD1Ev' already exists
Symbol 'rtems_task_variable_add' already exists
Symbol 'in_localaddr' already exists
Symbol 'rn_addroute' already exists
Symbol '__fp_lock_all' already exists
Symbol '__p_time' already exists
Symbol 'sbflush' already exists
Symbol '_Bfree' already exists
Symbol '_ZNKSt9type_info15__is_function_pEv' already exists
Symbol '_ZNSt13runtime_errorC1ERKSs' already exists
Symbol 'rtems_libio_semaphore' already exists
Symbol 'pru_listen_notsupp' already exists
Symbol 'rtems_kbpoll' already exists
Symbol 'rewind' already exists
Symbol '_timezone' already exists
Symbol 'bind' already exists
Symbol '_Dual_ported_memory_Manager_initialization' already exists
Symbol 'rtems_exception_prologue_13' already exists
Symbol '_ZNSt10bad_typeidD2Ev' already exists
Symbol '__cxa_get_exception_ptr' already exists
Symbol '_Thread_Stack_Free' already exists
Symbol '_Objects_Get_name_as_string' already exists
Symbol '_Chain_Get' already exists
Symbol '__ns_name_ntop' already exists
Symbol 'tcp_keepinit' already exists
Symbol 'rtalloc_ign' already exists
Symbol '__hi0bits' already exists
Symbol 'printk' already exists
.
