1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Channel access over wireless? |
From: | Ralph Lange <[email protected]> |
To: | EPICS Tech-Talk <[email protected]> |
Date: | Thu, 31 Oct 2013 19:13:58 +0100 |
On 31.10.2013 18:55, Emmanuel Mayssat
wrote:
Setting EPICS_CA_AUTO_ADDRESS=NO suppresses the UDP broadcast Setting EPICS_CA_ADDRESS_LIST restricts discovery traffic to a list of IP/port addresses Setting EPICS_CA_NAME_SERVERS uses TCP for discovery traffic to a list of IP/port addresses Setting both EPICS_CA_AUTO_ADDRESS=NO EPICS_CA_NAME_SERVERS=your.destination.ip.address:port will run Channel Access exclusively to that server/port, using TCP for name resolution and data. You could e.g. use this to tunnel CA through SSH. You can find more information in the Channel Access Reference Manual. HTH, ~Ralph |