1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: Cross compilation for linux-arm on target SBC (TS-7300) |
From: | Emmanuel Mayssat <[email protected]> |
To: | Azra Jabeen <[email protected]>, EPICS mailing list <[email protected]> |
Date: | Thu, 30 Jan 2014 09:48:45 -0800 |
if you look at the first line of your st.cmd, you will see it is referencing the myexample interpreter with path that appears in the error message
So either (1) the path is incorrect or (2) you haven't copied the binary file myexample from your host to your target hardware Building EPICS/asyn/etc on TS7xxx has been done before. So you are almost there. Good luck! -- Emmanuel Date: Thu, 30 Jan 2014 10:10:01 +0500 Subject: Cross compilation for linux-arm on target SBC (TS-7300) From: [email protected] To: [email protected] I build IOC for target SBC with linux-arm and copy only Application folder to SBC . When I run .st.cmd I got error Please some one help me?bash: ./st.cmd: ../../bin/linux-arm/myexample: bad interpreter: No such file or directory |