1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Recommended practice for cvtRecord chain initialization |
From: | Emmanuel Mayssat <[email protected]> |
To: | "[email protected]" <[email protected]>, EPICS mailing list <[email protected]> |
Date: | Thu, 13 Mar 2014 15:58:44 -0700 |
Benjamin, and al.
I have a recordAO (let's say a phase in deg) that is converted through a cvtRecord (~ breakpoint table) to a voltageAO. We could assume that the voltage on the device doesn't change while the IOC is off and autosave everything. But... in this particular case, where the hardware 'remembers' its voltage setting (EEPROM or hardware stays on while IOC is off), the chain above should be executed in the opposite direction at iocInit. A possible way is to have another cvt record with the same "breakpoint" table but with "1D table reversed" method and PINI=1. Is this the recommended way? -- Emmanuel |