1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: build question |
From: | D Peter Siddons <[email protected]> |
To: | Andrew Johnson <[email protected]>, [email protected] |
Date: | Tue, 01 Apr 2014 16:08:27 -0400 |
Hi Andrew,OK, I did that and it helped. I also needed to do the Makefile changes to make it RTEMS-specific as you suggested earlier and finally it built. THanks for your patience.
Pete. On 04/01/2014 02:11 PM, Andrew Johnson wrote:
On 04/01/2014 12:33 PM, D Peter Siddons wrote:peter@peter-Latitude-E4200:~/IOCs/det_640$ make make -C ./configure install make[1]: Entering directory `/home/peter/IOCs/det_640/configure' perl /usr/local/epics/base/bin/linux-x86_64/makeMakefile.pl O.RTEMS-uC5272 ../.. mkdir O.Common make[1]: *** No rule to make target `install.linux-x86_64', needed by `install.RTEMS-uC5272'. Stop. make[1]: Leaving directory `/home/peter/IOCs/det_640/configure' make: *** [configure.install] Error 2Ok, so the failure occurs when building in your configure directory; are there any differences between the files you have in there and the ones in the standard makeBaseApp template? You might want to try completely replacing your originals with new ones as we do make minor changes to them over time -- for example newer templates have a CONFIG_SITE file. The only file you'll want to keep would be the RELEASE file. - Andrew
-- D. Peter Siddons Detector Development Group Leader Bldg. 535B Photon Sciences Directorate, Brookhaven National Laboratory Upton, NY 11973 email: [email protected] Phone: (631) 344-2738