Experimental Physics and Industrial Control System
Hi All,
I am having a problem using the UInt32Digital type in ASYN. I am writing an areaDetector driver and have a camera that gives status back in 3 registers. I would like to read this value from the camera and put it into a UInt32Digital type so that I can make many records for all the status bits. In the constructor of the class I define:
createParam(FastCCDDCMStatusString,asynParamUInt32Digital,&FastCCDDCMStatus);
Then when I poll the camera I write the parameter using:
setUIntDigitalParam(FastCCDDCMStatus, dcm, 0xFFFF);
This works for all other parameters but not for this one. When the IOC boots, I get the rather cryptic message:
XF:23ID1-ES{Det-CCD}cam1:test devAsynUInt32Digital::initCommon findInterface asynUInt32DigitalType
I am sure this is most likely something stupid, but have drawn a blank to what it is. I would appreciate any help anyone has on getting this going. The code can be viewed at:
https://github.com/NSLS-II-CSX/ADFastCCD
Thanks!
Stuart
- Replies:
- RE: Problem with UInt32Digital in Asyn Mark Rivers
- Navigate by Date:
- Prev:
quadEM R4-1 now available Mark Rivers
- Next:
RE: Problem with UInt32Digital in Asyn Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
quadEM R4-1 now available Mark Rivers
- Next:
RE: Problem with UInt32Digital in Asyn Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024