1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | dxp R3-3 released |
From: | Mark Rivers <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Fri, 27 Jun 2014 22:44:49 +0000 |
Folks, Release R3-3 of the synApps dxp module is now available. These are the major items from the release notes: - Changed Makefile to build with areaDetector 2-0, which has a different layout than previous versions of areaDetector. - Fixed a bug in mapping modes on the xMAP and Mercury. The problem occurred when the final mapping buffer was just a few pixels and the dwell time per pixel was less than 5 ms. Under these conditions the final mapping buffer might not be read out, and the
file saving plugins would not get the callbacks for the final buffer. After acquisition completes both mapping buffers (A and B) may need to be read out, but the previous code was only forcing 1 read, not 2. Changed code to force 2 calls to read the mapping
buffers after acquisition completes. The link to downloading the source code and pre-built binaries can be found here: http://cars.uchicago.edu/software/epics/dxp The documentation is here: http://cars.uchicago.edu/software/epics/dxpDoc.html Cheers, Mark |