Experimental Physics and Industrial Control System
Subject: |
Recommended Control HWs for High Voltage Platform |
From: |
Jeong Han Lee <[email protected]> |
To: |
EPICS tech-talk <[email protected]> |
Date: |
Thu, 31 Jul 2014 19:24:04 +0900 |
Dear All,
We are designing a control system, which is, of course, based on
EPICS, for ECR Ion Source. There are three electrical potentials present
in our configuration. The first one is definitely the ground, the second
is at 45kV, and the other is at 75kV above the ground.
All devices and equipment, HV controller, vacuum, and so on, which we
want to monitor, are located at each HV potential.
A naive thought, which I have right now, is that MOXA NPort 56XX,
Ethernet Switch with Fiber Optic links, and EPICS IOC running on Linux
Platform should be enough.
Do you have any example which I can follow within EPICS collaboration?
Any suggestions and recommendation about HWs, designs, and others are
welcome always.
Thanks,
Han
--
Jeong Han Lee, Dr.rer.nat.
----------------------------
Accelerator Systems Division
Rare Isotope Science Project
Institute for Basic Science
Daejeon, South Korea
----------------------------
tel : +82-42-878-8733
fax : +82-42-878-8799
- Replies:
- Re: Recommended Control HWs for High Voltage Platform Heinz Junkes
- Re: Recommended Control HWs for High Voltage Platform Silver
- Navigate by Date:
- Prev:
RE: Formatting StreamDevice input Pal Trivan
- Next:
Re:epicsqt on arm board =?gb18030?b?SGFuc2Vu?=
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Power PMAC and EPICS Time stamps Choon Lim
- Next:
Re: Recommended Control HWs for High Voltage Platform Heinz Junkes
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024