1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | devAsynFloat64::initCommon findInterface asynFloat64Type |
From: | "Heesterman, Peter J" <[email protected]> |
To: | <[email protected]> |
Date: | Fri, 31 Oct 2014 16:57:21 -0000 |
Hi all, I’m developing a device that needs to read out a floating point value that forms part of a 24-byte structure read from the serial port. I’m doing this as an AsynPortDriver device. I get the above error on my record definition, but I’m not sure why. I’m still new as an EPICS user, so my question is: can you give me some advice as to what I’m missing? Many thanks, Peter. |
Attachment:
LeyboldTurbo.dbd
Description: LeyboldTurbo.dbd
Attachment:
LeyboldTurbo.db
Description: LeyboldTurbo.db
Attachment:
st.cm_
Description: st.cm_