Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <20142015  2016  2017  2018  2019  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <20142015  2016  2017  2018  2019 
<== Date ==> <== Thread ==>

Subject: Re: Interface Labview and EPICS
From: Alan Greer <ajg@observatorysciences.co.uk>
To: Mazanec Tomáš <Tomas.Mazanec@eli-beams.eu>, "Gao, Yuan" <ygao0709@anl.gov>, "tech-talk@aps.anl.gov" <tech-talk@aps.anl.gov>
Date: Fri, 31 Oct 2014 16:44:30 +0000
Hi,

Just to follow up on the comments regarding Observatory Sciences, we are currently undertaking development of a fully functional native LabVIEW channel access server (with client capabilities).  This will require no external libraries and will run on Windows, Linux and LV RT platforms.

We expect a first version to be ready by early next year.  Please email me directly for further information.


Thanks, Alan Greer



On 10/31/2014 04:31 PM, Mazanec Tomáš wrote:

Hello

Here is a nice summary:
ftp://ftp.ni.com/pub/branches/uk/handson_followup/epics_ral.pdf

We have tried EPICS module in LV 2013 and our-own-way: use of LV AMC module and EPICS streamdevice , both with focus on LV Realtime targets ( PC compatible one).
- The first was fine for small sets of variables.
- The second just sends structured data with UDP and requires little bit of development on both sides. It is promissing, however AMC will include desired TCP support someday soon.

As far as I know about the others:
- CA lab doesn't work with LV RT targets,
- SNS and ObservatorySciences are not publicly available.

We haven't found the right one yet, I'm afraid.

How frequently you intend to R/W you data to LV ?

Cheers,
Tomas



Od: tech-talk-bounces@aps.anl.gov [tech-talk-bounces@aps.anl.gov] za uživatele Gao, Yuan [ygao0709@anl.gov]
Odesláno: 22. října 2014 1:20
Komu: tech-talk@aps.anl.gov
Předmět: Interface Labview and EPICS

Hello, 

I am wondering if someone knows how to interface Labview (Windows system) with the EPICS. I am going to use Labview to control a equipment during my beamtime. It would be convenient if EPICS can write and read numbers from Labview (e.g. scan). 

Thanks, 

Yuan Gao


References:
Interface Labview and EPICS Gao, Yuan
RE: Interface Labview and EPICS Mazanec Tomáš

Navigate by Date:
Prev: RE: Interface Labview and EPICS Mazanec Tomáš
Next: devAsynFloat64::initCommon findInterface asynFloat64Type Heesterman, Peter J
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <20142015  2016  2017  2018  2019 
Navigate by Thread:
Prev: RE: Interface Labview and EPICS Mazanec Tomáš
Next: Re: Interface Labview and EPICS Dale L. Brewe
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <20142015  2016  2017  2018  2019 
ANJ, 17 Dec 2015 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·