1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: compile qtdm |
From: | Emmanuel Mayssat <[email protected]> |
To: | Tong Zhang <[email protected]> |
Cc: | Mezger Anton Christian <[email protected]>, EPICS mailing list <[email protected]> |
Date: | Fri, 14 Nov 2014 10:35:27 -0800 |
Tong Zhang,
I can certainly help you. Difficult to say what exactly is the problem without the error message. To start, I would just guess that you environment is not set correctly. Are you on Linux? Note that QtDM requires a few environment variables to be set to start and run correctly. What are your settings for QTDM_LIBINSTALL, QTDM_RPATH, and LD_LIBRARY_PATH? In the tutorial you are following, my installation paths were /home/local/epics # Home directory of the epics user +-- base +-- <base.version> # Base version is 3.14.12.4 +-- bin/linux-x86_64 +-- lib/linux-x86_64 +-- extensions +-- <base.version> # Extensions compiled against this base version +-- src # Where the source for EPICS extensions is installed +-- bin/linux-x86_64 # Where the extension binary files are installed +-- lib/linux-x86_64 +-- extras # Non-EPICS base and non-EPICS extensions +-- <base.version> # Version the source was compiled against +-- bin/linux-x86_64 # Where the binary files are installed +-- lib/linux-x86_64Regards, -- Emmanuel Mayssat http://www.epicsqt.org > Date: Fri, 14 Nov 2014 14:44:18 +0800 > From: [email protected] > To: [email protected] > Subject: compile qtdm > > Hi Emayssat, > > I came cross your caQtDM wiki page, it is really a great job. I'm > working on the development for FEL facility control applications, and I > have experience about C++/QT, so your qtdm is a nice tool for me to > choose. However, I failed to compile the source, is complains the > qtcontrols lib when linking, my qt version is 4.8.6, could you please > help me out? > > Thanks! > > -- > Tong Zhang > Free-electron Laser Department, > Shanghai Institute of Applied Physics (SINAP), CAS > 2019 Jialuo Road, Shanghai 201800, China > Office: +86-021-3919-4269 |